Author Topic: 97 MM600 hesitation  (Read 3888 times)

Offline pengkaiyi

  • Newbie
  • *
  • Posts: 1
  • Karma: +0/-0
97 MM600 hesitation
« on: July 05, 2006, 11:49:21 AM »
I have a 97 MM600 all stock, when the throttle is opened, there is hesitation and extreme bogging.
Could it be the carbs need to be tuned up?

Offline I Ride Sand

  • Newbie
  • *
  • Posts: 48
  • Karma: +0/-0
    • http://none
97 MM600 hesitation
« Reply #1 on: July 22, 2006, 09:55:17 PM »
Quote
I have a 97 MM600 all stock, when the throttle is opened, there is hesitation and extreme bogging.
Could it be the carbs need to be tuned up?
[snapback]140899[/snapback]
if you havent fixed it yet... are all the jets clear? is it too lean? is there a baaad air leak?
its not broken, its just broke-in!!!

if at first you dont suceed... use a bigger hammer!!!

ive gone to go find myself. if i so happen to arrive before i return, please keep me here untill i get back.

Offline chadderbox235

  • Newbie
  • *
  • Posts: 1
  • Karma: +0/-0
Re: 97 MM600 hesitation
« Reply #2 on: December 28, 2008, 03:17:53 PM »
Have you checked your clutches, primary rollersand weights. Secondary slider buttons(ramps)?
Clutching can fool a good mechanic!
Good Luck,Chad